Công tắc khẩn báo cháy AMS VF3031-10 | VF3032-10 | VF3029-10

The AMS series of addressable manual pull stations provide a fast and practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations are available. Resetting of the pull station requires either a Cat 30 key or a 1/8” hex key (depending upon the model used).
An alarm condition is actuated by pulling down on the handle of the VF3031-10 and VF3032-10 single action models. On the dual action model VF3029-10 the Lift and Pull cover must be lifted before pulling down on the pull station handle. Once the pull station is activated, the handle cannot be put back into a normal standby condition without using the key operated reset feature.
The AMS series is electronically addressable and includes a bi-colored status LED. The LED blinks green indicating normal communication with the DCP compatible SLC loop. When an alarm condition is actuated by pulling the handle, the LED will latch Red to indicate the alarm condition.

⇓ Tải xuống Catalogue VF3031 | VF3032 | VF3029

AMS Manual Pull Station
VF3031-10, VF3032-10, and VF3029-10   

Standard Features
• Addressable integrated design
• All metal construction
• Single and dual action models available
• Extremely easy to operate
• Bi-colored status LED indicates Standby and Alarm conditions
• Address is programmable in EEPROM
• Address can be programmed when installed
• Key lock or hex key lock models available
• Enclosed switch with glass rod (included)
• Terminals accept up to 14AWG wire
• Surface mount back box available

Ordering Codes


Single action with Hex Screw Lock


Single action with Hex Key Lock


Dual action with Key Lock

There are no reviews yet.

Be the first to review “Công tắc khẩn báo cháy AMS VF3031-10 | VF3032-10 | VF3029-10”